Phoenix Radiators

The automobile radiators are in place to reduce the temperature in the engine. Heat transferred through a heat exchanger is its purpose. The job of the radiators in the automobile is to keep the temperature at an even pace, so it does not overheat. Overheating can cause severe damage to the engine such as a cracked block, warped cylinder head or a blown head gasket. These are some reasons for radiator repairs. This cooling unit controls the temperature of the internal combustion engine which is how the coolant is cooled. The use of coolant antifreeze solution in the engine is cycled through this unit. The unit then forces the coolant by means of air flow. In other words, when driving your car the motion of the car forces air through the unit. There is also a fan in place that pulls air through the unit when the car is not in motion.

peugeot400

The radiator consists of a tank and a series of tubes. Attached to the tubes are the cooling fins. When heated coolant flows through the tubes the heat is transferred to the cooling fins. Air flows through the cooling fins taking the heat away. There is a pump and thermostat in the system and at a predetermined temperature it allows the coolant into the unit and then to the engine. This continuous cycle is the job of this cooling system.

Besides overheating issues that are fairly common, with radiators Phoenix AZ. radiator repairs are made on leaks in the unit. These leaks can be repaired by soldering the tube. The radiator shops will first pressure test the unit using a little air and dump it into a tank of water to locate where the leak may be and repair it accordingly. The radiator shops may recore the unit if they find it is rotted out. This process will bring the unit to as close to the original operating condition as possible using restored new or rebuilt parts. For A great phoenix radiator shop, click here

steam1

To maintain radiators, cleaning is sometimes necessary. The unit is cleaned internally and externally. A pressure washer or steam cleaner is used for the outside. The tubes are cleaned with a flat spring steel rod to remove any debris and then it is flushed to guarantee all the debris is out and they are able to work without any obstructions. many old corvettes have this issue witch is why most people put their classic corvettes for sell. vettelove.com is the most popular website for that.